You have an outdated webbrowser. The website might not work correctly.

Order before 5:30 PM & get same day shipping
All prices include VAT, fees and charges
Fixed shipping rate of £9.95 for all orders
We ship from the Netherlands

CPM steel after Crucible: why does your knife no longer say CPM?

You’re seeing “MagnaCut” on more and more knives where it used to say “CPM MagnaCut”. It’s not a misprint and it’s not a fake: CPM steel has a new owner and a new production chain. Below, you can read how that happened, and why you don’t need to worry about the quality.

Gerber StrongArm with MagnaCut steel

What is CPM steel?

CPM steel is powder-metallurgy steel that was originally made by the American company Crucible Industries. CPM stands for “Crucible Particle Metallurgy”. In this process, molten steel is atomised into a fine powder, which is then pressed under high pressure and temperature into a solid block. The result is a steel with a very fine, uniform structure. This allows it to combine high hardness and excellent edge retention with good toughness.

Well-known examples include CPM S30V, CPM S35VN, CPM S45VN, CPM 3V, CPM 154, CPM S90V, CPM CruWear and, of course, CPM MagnaCut. The latter was developed by metallurgist Larrin Thomas, known for the Knife Steel Nerds website, and is seen by many enthusiasts as one of the best stainless knife steels available right now.

What happened to Crucible?

Crucible Industries, in the state of New York, filed for bankruptcy protection in late 2024. In February 2025, the European steel company Erasteel bought part of its assets, including the CPM brand names and the associated know-how of the production process. Erasteel has sites in France and Sweden and has been making powder-metallurgy steel for decades. Bob Skibitski, who led powder production at Crucible for twenty years, now also works for Erasteel.

The steel powder for these steel types is now made in Sweden. The American company Niagara Specialty Metals, which for many years has been rolling Crucible’s steel sheets and supplying them to knifemakers, still does so. So the steel no longer comes entirely from the United States, but processing into sheet steel still happens there. Where the knife itself is made does not change because of this.

Why is “CPM” disappearing from the marking?

Niagara is allowed to keep using the familiar names, such as S30V, S35VN, S45VN, 3V, CPM 154 and MagnaCut. The “CPM” prefix is no longer mandatory. That’s why some manufacturers leave it off the packaging, in the specifications or in the marking on the blade. CPM MagnaCut then becomes simply MagnaCut, CPM S35VN simply S35VN.

Two steel types were given a new name due to agreements on trademark rights: CPM CruWear is now called NSMWear at Niagara, and CPM S90V continues as NSM 90PM. The composition has remained the same.

Gerber StrongArm with a MagnaCut steel blade

Has the quality of CPM steel changed?

No, the quality of CPM steel has not changed, and it’s been researched too. In January 2026, Larrin Thomas, the creator of MagnaCut, tested Erasteel’s MagnaCut alongside the original Crucible steel. His conclusion: the new MagnaCut is at least as good as Crucible’s old CPM steel. In a salt spray test, neither version rusted; the hardness after heat treatment was virtually the same, and the toughness of the Erasteel version was even clearly higher.

Niagara and Thomas himself also say the quality from the new producers is high. So a knife marked “MagnaCut” without “CPM” is not a different or inferior knife. It’s also not a production error and not a sign of a counterfeit product, but the new reality for Crucible’s steel types.

Why does the marking of CPM steel vary from knife to knife?

Niagara bought up a substantial stock of Crucible steel from early 2024 onwards. Knife manufacturers also buy their steel per batch, and that batch can sometimes last for years. As a result, knives are still being made from “old” American CPM steel, alongside knives made from steel from the new production.

Whether your knife says “CPM MagnaCut” or “MagnaCut” can therefore vary by manufacturer, brand, series, model and even by production batch. So two examples of the same model can have different markings, while in both cases you’re holding the same steel. Our product photos and specifications sometimes still show the old marking; that says nothing about the quality of the knife you receive.

In short

CPM steel still exists; it’s just that the name on the blade doesn’t always follow the old format anymore. Production has moved to Erasteel in Europe, finishing still takes place in the US, and the quality is at least as good. Curious what makes MagnaCut so special? Then read all about CPM MagnaCut steel or browse our pocket knives with MagnaCut and fixed knives with MagnaCut.