Name: Autine Puukko, Curly Birch, Elmax, brown RH sheath
Brand: Autine
SKU: AT-PUUKO
Price: 320.95 GBP
Availability: OutOfStock

Hultafors trekking axe H 006 SV, 840025

notforsale

not_replaced_in

legal_agecheck_key

productlabel

msrp_price

Schrade 21” Machete SCMACH2 machete

Spyderco C94PBK UK Pocket Knife

Fiskars X5 fireplace set with axe, knife and sharpener

Gränsfors Bruk Large Splitting Axe 442

Gränsfors Bruk Outdoor Axe 425, bushcraft axe

Fiskars Pro IsoCore S splitting maul

Silky Bigboy 2000 Outback Edition, 360-6.5

Nisaku Hori Hori garden knife TM-650

Fällkniven GPs Gentleman's Pocket knife Desert Ironwood

Gerber Freescape Camp foldable saw

Gränsfors Bruk Splitting Maul 450

Hultafors splitting axe KLY 7-0.9 SV, 840581

Silky Pocketboy Outback Edition, 170-10

Petromax Atago rocket stove

Fiskars Pro IsoCore XXL splitting maul

Maglite - torch 6-D type

Eden Takobiki Ryoba 27 cm, red sandal wood

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

Knives and Tools Knife Cleaning Mat, rubber

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Skerper Paddle Strop STP001, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Spyderco Sharpmaker, 204MF

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #MatchPatch, #01 OG-Green, patch

Skerper Beeswax MA001, 250 gram

Ballistol maintenance oil, 50 ml

Knivesandtools #OneKnifeStand, knife stand

Knivesandtools #EveryDayCloth, micro-fibre cloth

Fallkniven Diamond Ceramic Whetstone DC4

Ballistol maintenance oil spray, 200 ml

Handle/blade: curly birch and ebony/stainless Elmax
Blade length: 8,3 cm
Weight: 80 grams


The **Autine Puukko** is a striking outdoor knife, based on the traditional Scandinavian Puukko. It is made by hand in a small workshop in Latvia. 



The blade is made from Elmax steel, hardened to 61-62HRC. And the heat treatment is something Autine is famous for. You can use amazing steel, but if it isn't hardened properly, the entire knife is worthless. Autine's Elmax steel retains its sharpness well. Which you would expect from 62HRC. At the same time, the blade is tough enough to not break or chip. The corrosion resistance is also great. With a blade thickness of only 2.5 mm, this knife has a nice thin grind. This gives it fantastic cutting properties. The spine of the blade is thinned a bit more on top of the tip. This knife is simply amazing to use. It can be used to cut through many different materials. The end of the Scandi edge is convex stropped for an extra durable cutting edge. And the edge is razor-sharp, as you would expect from Autine.



The handle of the Autine Puukko is made from *curly birch*. This birchwood has a nice wavy texture. There is a dark ebony bolster on the front. In terms of shape, the handle is relatively narrow, but high enough to provide you with enough surface for your hand. In true Puukko style, you won't find a finger groove on this knife. However, the handle is so beautifully shaped that it naturally locks in place in your hand.


The Autine Puukko comes in a leather sheath. It is relatively flexible and will take the shape of the knife after some time.


## Autine by John Neeman


Autine is the brainchild of John Neeman. This master smith, also known from Neemantools, has years of experience when it comes to forging and creating stunning knives and axes. The best quality, at a custom level.



Please note: because of the handmade character of the knife, there may be subtle variations in terms of size and specifications.



Autine Puukko, Curly Birch, Elmax, brown RH sheath

Autine Puukko, Stainless Damascus, brown RH sheath

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

brand

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Autine Puukko, Curly Birch, Elmax, brown RH sheath

Autine Puukko, Curly Birch, Elmax, brown RH sheath

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Autine Puukko, Curly Birch, Elmax, brown RH sheath

Autine Puukko, Curly Birch, Elmax, brown RH sheath

Autine Puukko, Curly Birch, Elmax, brown RH sheath

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Autine Puukko, Curly Birch, Elmax, brown RH sheath

Relevant topics