Name: Spyderco Matriarch 2 Emerson Opener Black C12SBBK2W Black FRN, serrated pocket knife
Brand: Spyderco
SKU: SPC12SBBK2W
Price: 141.45 GBP
Availability: InStock

The **Spyderco Matriarch 2** is an evolved version of the original Matriarch. The Matriarch is one of Spyderco's most iconic pocket knives. The original design of the Matriarch was inspired by a request from Spyderco's South African distributor for an economical version of the classic Spyderco Civilian. Fast-forward a few years to 2023 and the Matriarch 2 is here! 

## Spyderco Matriarch 2 blade

The blade of the Matriarch 2 is made from VG10. This is a tough steel that retains its sharpness well. The S-shaped blade combined with Spyderco's serrated SpyderEdge are what makes the Matriarch such a distinctive knife. This blade shape is suitable for diverse tactical purposes. However, it's also great for opening packages or cutting rope.

You can quickly open the Matriarch 2 with the thumb hole, or with the Emerson Wave Opening Feature. With this feature, you slightly pull the knife back when you take it from your pocket. The Wave will get caught behind the side seam of your pocket and the knife will automatically open as you pull it out. A great feature when every second counts!

## Spyderco Matriarch 2 handle

For the handle, Spyderco chose to use the design of the Endura 4 as a starting point. Thanks to the FRN (fibre glass-reinforced nylon) the knife is very light-weight, despite its size. The solidity is increased by the steel liners in the handle. These, however, are milled out to make sure the liners don't make the knife too heavy. FRN can also handle cold, heat, moisture and many chemicals.

The pocket clip can be attached in four different places. Both left and right-handed users can easily use this knife.

Spyderco Matriarch 2 Emerson Opener Black C12SBBK2W Black FRN, serrated pocket knife

colour

Spyderco Matriarch 2 Emerson Opener C12SBK2W Black FRN, serrated pocket knife

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

legal_agecheck_key

notforsale

not_replaced_in

expectedRestockDate

videos

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

carry_friendly

With this information we say whether a knife can be legally carried according to the knife laws in the United Kingdom. Warning! There are always exceptions and weapon-free zones where carrying knives may still not be allowed. Here you can find more information about the knife law in the [United Kingdom](/en/ct/uk-knife-laws.htm). No rights can be derived from this information.

UK Carry Friendly

General information

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Spyderco Matriarch 2 Emerson Opener Black C12SBBK2W Black FRN, serrated pocket knife