Knivesandtools Knife Pouch Wolf Grey, by Maxpedition

notforsale

not_replaced_in

Knivesandtools Knife Pouch Black, by Maxpedition

Handle/blade: G10 and carbon fibre/S35VN
Blade length: 9.5 cm
Weight: 175 grams


The **Todd Begg Glimpse** is a large top-quality pocket knife. It is a pocket knife from the Todd Begg Steelcraft collection. The Glimpse is, unlike the previous Steelcraft models, made by [WE Knife](/en/ct/we-knife-pocket-knives.htm). This Chinese brand has definitely earned its stripes as high-end producer. The result is an exceptional top-quality knife.


The Glimpse has a characterizing G10 handle. And not just G10: but smooth G10, with carbon fibre inlays. The way the inlays perfectly fit tell you how accurately We Knife works. Many Western products can learn from it. The blade is 9.5 cm long and the total length is 22.6 cm. And yet it only weighs 175 grams. Remarkably light for a knife this size. Because of the additional finger groove in between the flipper and the edge you will have a lot of control while cutting. The blade itself is made from CPM S35VN steel and has a *satin finish*. The fuller has been enhanced with a black DLC-coating.


You can open the Todd Begg Glimpse with the flipper. The blade runs smoothly on the ceramic IKBS bearings. The blade shoots from the handle and is locked with a liner lock. The pocket clip has been enhanced with the characterizing Begg ceramic ball. It is a little less strenuous on your pocket.


The *Todd Begg Glimpse* is the successful result of a fruitful cooperation between Todd Begg and We Knife. A stunning pocket knife, put together exceptionally well. An asset to any collection.




Todd Begg Steelcraft Glimpse, satin fluted blade, black G10 and CF WKGCF1F

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

carry_friendly

With this information we say whether a knife can be legally carried according to the knife laws in the United Kingdom. Warning! There are always exceptions and weapon-free zones where carrying knives may still not be allowed. Here you can find more information about the knife law in the [United Kingdom](/en/ct/uk-knife-laws.htm). No rights can be derived from this information.

UK Carry Friendly

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Todd Begg Steelcraft Glimpse, satin fluted blade, black G10 and CF WKGCF1F

Todd Begg Steelcraft Glimpse, satin fluted blade, black G10 and CF WKGCF1F

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Todd Begg Steelcraft Glimpse, satin fluted blade, black G10 and CF WKGCF1F

Todd Begg Steelcraft Glimpse, satin fluted blade, black G10 and CF WKGCF1F

Todd Begg Steelcraft Glimpse, satin fluted blade, black G10 and CF WKGCF1F

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Todd Begg Steelcraft Glimpse, satin fluted blade, black G10 and CF WKGCF1F

Relevant topics