Name: TRC Knives Harpoon Custom, M390, Custom Carbon fibre, fixed knife
Brand: TRC Knives
SKU: TI-HP-CUST
Availability: OutOfStock

Civivi Tamashii C19046-1 Black G10 fixed knife, Bob Terzuola design

legal_agecheck_key

notforsale

not_replaced_in

msrp_price

Ballistol maintenance oil, 50 ml

productlabel

Skerper Pocket Strop STP002, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Work Sharp Angle Set knife sharpener, WSBCHAGS

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Fallkniven Diamond Ceramic Whetstone DC4

TSPROF Blitz Full TS-BS19001F sharpening system

Lansky Masters Edge Sharpener, MEDGE1

Handle/blade: carbon fibre/M390
Blade length: 9.9 cm
Weight: 190 grams

The **TRC Knives Harpoon Custom** is a remarkable fixed knife from the TRC Knives custom collection. This means that even more parts of this knife are made by hand, and that only a limited amount of this knife are produced. Once sold out it could take a very long time before new versions are available, and each knife is unique.

 The blade is made from Böhler M390. A premium type of steel which many knife enthusiasts consider to be the best out there. It retains its sharpness well and is very corrosion resistant. For this custom they left the finish on the blade as it was when it came from the oven. They call this the *Apocalypse finish*. A brown-bronze look that is different for each knife.

 The hollow-grind that was applied by hand deserves special mention. It is exceptional and nice and thin. As such you can sharpen it often without the blade getting (much) thicker behind the edge.

 As the name might already suggest it has been enhanced with a harpoon tip. The great thing about this model is that there is a nice contrast between the dark finish of the blade and the satinized parts.

 The handle is made from a unique type of carbon fibre. In this case a gold-coloured metal powder is mixed through it. This gives the knife a unique look and feel. The *custom hardware* with the famous three-hole screws also looks amazing.

 The TRC Harpoon is a robust survival knife that will look amazing in any collector's display case. At the same time it is solid and robust enough to be used for years to come.

 The TRC Knives Harpoon Custom comes with a brown leather sheath, without belt loop.



TRC Knives Harpoon Custom, M390, Custom Carbon fibre, fixed knife

brand

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

TRC Knives Harpoon Custom, M390, Custom Carbon fibre, fixed knife

TRC Knives Harpoon Custom, M390, Custom Carbon fibre, fixed knife

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

TRC Knives Harpoon Custom, M390, Custom Carbon fibre, fixed knife

TRC Knives Harpoon Custom, M390, Custom Carbon fibre, fixed knife

TRC Knives Harpoon Custom, M390, Custom Carbon fibre, fixed knife

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

TRC Knives Harpoon Custom, M390, Custom Carbon fibre, fixed knife

Relevant topics