Name: Naniwa Specialty Stone, SP-410, grit: 1000
Brand: Naniwa
SKU: NASP-410
Availability: OutOfStock
Rating: 8.66667 (6 reviews)

Naniwa Dressing Stone, A-206, grit: 600

notforsale

not_replaced_in

Skerper Sink Bridge sharpening stone holder, SA002

Skerper Basic ceramic sharpening steel, 24.5 cm, SH003

Skerper whetstone holder SA001

Skerper Flattening Stone SA004 grain 24/220

Skerper Beeswax MA001, 250 gram

Skerper Axe Sharpener 160/600, SO002

Naniwa whetstone holder A-902

Skerper Paddle Strop STP001, stropping paddle

Skerper Dressing Stone, SA003

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Naniwa flattening block, grain 220, A120

Naniwa flattening stone, grain 220, A102

High quality Japanese water stone
Grit: 1000
Dimensions: 21.0x7.0x1.0 cm
Own import so very inexpensive!


The Naniwa Specialty Stone-series is the improved version of the well-known Super Stones-series. Naniwa has renewed the binding agent of the water stones. It is unique that Naniwa itself takes care of the production of the binding agent. Optimal matching to the grit size is important. The result of this is that the sharpening properties of Naniwa water stones are significantly better than sharpening stones of other brands even though the grit size is comparable. The Specialty Stones are hard sharpening stones so it is not very likely that your knife will 'bite' into the stone. Also the wear of the stone is minimal; they have a very long lifespan. However, it is advisable to regularly clean the sharpening stone with a 'dressing stone'.  
  


The Specialty Stones are synthetic resin-bound. The absorption of water is minimal so you only have to wet them and you can immediately start the sharpening process. They do not have to be submerged. The water stones will wear very slowly during the sharpening process. The advantage of this is that the stone cleans itself, as it were. Despite the 'wear' a Specialty Stone will have a very long lifespan.  
  

**About the grit size**
Sharpening stones are delivered with several grit sizes. The larger the number, the finer the grit. The finer the grit, the sharper the sharpening result. You start the sharpening process with a coarse grit and then continue with a finer grit. Steps of a factor two to three between the different grit sizes are ideal.  
  

**Indication for the selection of the correct sharpening stone:**


* Grit 200 to 600: suitable for repairing the cut of blunt knives

* Grit 800 to 1000: suitable for the sharpening of knives that are in a good condition

* Grit 2000 to 3000: for a sharper sharpening result than the condition in which many new knives are delivered

* Grit 5000 to 12000: for the sharpening of knives into a razor sharp condition




Naniwa Specialty Stone, SP-410, grit: 1000

brand

colour

series

grit_general

stone_abrasive

value_number

value_width

value_height

value_length

value_weight

expectedRestockDate

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Ich liebe diese Schleifsteine sie liegen im mittleren Preisegment aber sind in der Qualität schwer zu Topen !!! Die Bindung des Schleifgranulats ist sehr fest dadurch halten die Steine ihre Form sehr gut !!! Im Gegensatz zu günstigen Schleifsteinen hält hier auch die Körnungsangabe was sie verspricht mit #3000 poliert man schon die schneide was mit günstigen weichgebundenen Steinen nicht der Fall ist . Lange Rede kurzer Sinn absolute Kaufempfehlung !!! Vielen Dank an KniveandTools für den Klasse Service und den Blitzschnellen Versand weiter so !!!!

Is reeds getest en voldoen aan al mijn verwachtingen. Ik zou het aanbevelen aan derden.

Works well to get kitchen knives and chisels very sharp quite quickly.  All you need unless you have chipped the edge and need to reprofile. Does clog with metal dust from the tools you are sharpening but you can clean very quickly with some fine wet and dry on a flat glass plate. Stone is quite hard so won't bow too quick.

le produit présentait quelques défauts de surface mais très minimes. donc je l'ai gardé car je ne pense pas que cela nuise à son utilisation.
sinon je trouve le prix de ces pierres a aiguiser d'une façon général assez élevé .

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

value_height_usable_part

The height/thickness of a sharpening stone (excluding a potential base).

Height usable part

value_length_useful_part

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

value_width_useful_part

Dimensions & weight

The material that gives the sharpening stone its abrasive effect. Diamond, ceramics (e.g. aluminium oxide or silicon carbide) or the materials in a natural stone. Read [more about the advantages and disadvantages of these materials](/en/ct/sharpening-stone-materials-which-are-the-best.htm).

Abrasive

stone_binder

The agent that brings all the abrasive particles in a sharpening stone together. The cohesive agent usually consists of natural products, such as cellulose, wax, clay and even magnesium, or synthetic products such as: polyacrylates, polyvinyl alcohol or various synthetic resins. The cohesive agent itself usually has no abrasive effect.

Cohesive agent

Material

fixed_sharpening_angle

* No: the device has a variable adjustable sharpening angle.  
* Yes: the device has one fixed, non-adjustable sharpening angle.

Fixed sharpening angle

The grain size a supplier gives to its sharpening stones. Please note: This can be either in FEPA-F (European), ANSI (American) or JIS (Japanese). Read [more about the different grain sizes here](/en/ct/expressing-grain-sizes-sharpening-stones.htm).

Grit according to supplier

stone_acc_type

stone_guides

Sharpening guides help you maintain the right angle when sharpening your knives. [Read more about using sharpening guides here](/en/ct/use-of-sharpening-guides-on-whetstones.htm).

Delivered with sharpening guides

stone_water

Some sharpening stones need to be submerged, others only need a splash of water and some need no water at all! For the best results, check in advance what is best for your sharpening stone.

Use with water

Features & functions

sharpstone_package

stone_stand

A holder/base that ensures the stone doesn't move during the sharpening process.

Reviews for Naniwa Specialty Stone, SP-410, grit: 1000

Reviews for Naniwa Specialty Stone, SP-410, grit: 1000

Reviews

Average rating

Reviews for Naniwa Specialty Stone, SP-410, grit: 1000