Ordered before 18:00, shipped the same day Free shipping over £ 50,- Free returns within 30 days.
9.6
Kitchen knives
& cutting
Pans
& cookware
Knife sharpening
& maintenance
Pocket knives
& multitools
LED Torches
& batteries
Binoculars
& scopes
Outdoor
& gear
New
products
Countdown
Deals

Information

Everything about sharpening angles

A question often asked is: 'What is the right sharpening angle for this knife?' Makes sense, because for many of the knives on our website we list the angle as we have measured it. But how important is it to use the exact same angle? How much variation do you have?

What is the sharpening angle?

The sharpening angle of a knife is the angle at which one side of the edge is sharpened. This only concerns the so-called 'secondary V-edge' which often takes up only one to two mm of the end of the knife. A knife with a 17 degree sharpening angle has a total edge of 34 degrees.

How do we determine the sharpening angle?

Each knife that ends up on our website is measured. Length, thickness, weight, but also the sharpening angle. For it we use the goniometer. This is a device that uses a laser beam to shine on the edge after which it is projected on a distribution of degrees. As such we can tell what the sharpening angle of the specific knife is.

Variations in the sharpening angle

In a time of CNC milling and laser cutting it is expected that each knife is identical. When, for instance, you grab 10 knives they should all be the same. In reality, however, that is not really true. Individual parts of a knife are namely made with a machine, but the assembly is almost always done by hand. The same applies to sharpening. Most knife makers sharpen knives by hand on a fine sharpening belt.

This means that the sharpener determines the angle by hand. A trained hand might be able to maintain that pre-determined angle. However, a difference between 19 and 22 degrees isn't something you can blame anyone for. As such, the sharpening angle we measure is merely an indication. A listed value of 20 degrees could therefore mean that the knife you receive has been sharpened at an angle of 18 or 22 degrees. For guidance systems this is a practical indication to make sure you can at least start with the right angle. However, it is not a fixed fact you must adhere to at all costs.

Of course there are also gigantic knife companies that use an automatic knife sharpener. Wüsthof, for instance, sharpens all knives with a laser-controlled system to make sure each knife ends up with exactly the same sharpening angle. Victorinox also uses this type of machine. It has to, with the millions of pocket knives that it produces each year.

Determine a sharpening angle yourself

You can also easily choose a sharpening angle for your knife. You could do this because your sharpening system has a pre-determined sharpening angle that doesn't completely fit on the existing sharpening angle. Or because you want to make sure the knife maintains its basic sharpness longer. As such you can easily use a different angle to sharpen your knife. We do, however, recommend you don't deviate too far from how the manufacturer supplied the knife.

You should consider sharpening angles as such:

The smaller the sharpening angle, the larger the sharpness you will experience but also the faster the knife will be blunt again. The larger the sharpening angle, the blunter the basic sharpness, but the longer it will remain sharp. 

That is why it is important to get close to a 'sweet spot' to make sure the knife performs the way you want it to. A knife that is used to cut carpet and other heavy materials benefits from a larger sharpening angle. After all, it doesn't have to be razor-sharp, but does need to retain its sharpness to make sure you can get the job done.

At the same time a filleting knife needs a very small sharpening angle to make sure the knife is easy to work with. And as long as you don't come across any bones the edge doesn't have to suffer as much.

Which sharpening angle should I choose?

When we look at what we encounter with all the pocket and fixed knives that are listed on our website, you end up with an average range between 15 and 25 degrees. For kitchen knives we are talking about 10 to 22 degrees. Exceptions aside, of course.

For pocket knives we use 17 degree sharpening angles for lighter work. Peeling an apple, opening letters. But also for hunters or fishermen who clean their caught prey a small angle is great. For all-round use we maintain a 18 to 20 degree angle. For 21 degrees and up we are talking about heavy-duty use. Think of heavy packing materials or for processing wood. For these tasks you are looking for an edge that is slightly stronger.

In the kitchen we use 10 to 15 degree sharpening angles for filleting knives or Japanese knives. Most Japanese knives are incredibly hard and can therefore be sharpened a lot thinner. The filleting knives need to be razor-sharp to cut thin slices without the fish tearing. These knives are often not very hard in terms of steel and need to be sharpened more often. Western kitchen knives are enhanced with a sharpening angle of approximately 16 to 20 degrees. Of course there are also special kitchen knives with a one-sided grind, or cleavers that use completely different sharpening angles.

When, after changing the sharpening angle, you notice that the knife becomes blunter a lot quicker it is time to make the sharpening angle bigger. Not every type of steel is the same and not every geometry works for each knife.

How do you sharpen your knives with the same angle as is used in the factory?

It is, of course, easier and more economical to use the angle that is used to sharpen the knife the first time. After all, this means that you don't have to remove so much material, Do you really need to know the exact number to find the right angle? No. Fortunately there is the 'marker trick'.

XgktDviMNnQ

In the video above we will tell you more about how to use a marker to colour the edge to determine the angle. You can use this trick for basically every sharpening method.

Sharpening on a sharpening stone? Check here how you can determine the right sharpening angle on a sharpening stone.

Sharpening angle of guided sharpening systems

Sharpening systems such as those produced by Wicked Edge, DMT, Lansky and Edge Pro work with a sharpening stone that moves over the edge of a secured knife. Always using the same angle. That is clear. But is it always the angle that is highlighted on the sharpening system?

When we look at a system produced by Lansky we can tell that you can select sharpening angles of 17, 20, 25 and 30 degrees per side. All pre-determined. But does that also mean that each knife where the angle is set to 20 degrees is also sharpened at a 20 degree angle? No. It is the result of the blade height. In the illustration below you can see a cross-section of two Lansky sharpening systems. On the left a knife with a 'high' blade, on the right a lower blade.

Lansky

Both use the same sharpening angle. And yet you can tell that the sharpening angle (where the blue line crosses the centre line) is really different. That is why the sharpening angle a manufacturer puts on a guided system is merely indicative. It really depends on the knife. That is why it doesn't make much sense to know the exactly measured sharpening angle if you are planning to sharpen your knife in such a system. That is when the marker trick is a lot more useful.

Conclusion

Now you know that sharpening angles always vary and that you can match the factory sharpening angle with one simple trick. That is simply the easiest way to do it and you know that you are (approximately) using the same angle the manufacturer had in mind. You can easily carry out small adjustments, you just need to know what you are doing!


Read more