Name: Ontario RAT-3 serrated, 8633
Brand: Ontario
SKU: OKC8633
Availability: BackOrder

Skerper paddle strop Viking, rough, stropping paddle

notforsale

not_replaced_in

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper Pocket Strop STP002, stropping paddle

Work Sharp Guided Field Sharpener, WSGFS221

Shapton Glass Stone sharpening set grit 1000, 3000 and 8000, 50508

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Ballistol maintenance oil, 50 ml

Ontario RAT-2 BP plain edge black, 8861

legal_agecheck_key

Ontario RAT-1 BP plain edge black, 8846

TSPROF Blitz 360 Complete sharpening system

Work Sharp Angle Set knife sharpener, WSBCHAGS

KME Precision Knife Sharpening System, R.P.S.H. Combo Kit, KF-CBO

Nano-Oil 10w maintenance oil 8cc/8ml

Ontario sharpening stone, replacement sharpening stone for the Ontario 499, O6151

Handle/blade: micarta/1095-cabonsteel
Blade length: 9.6 cm
Weight: 142 grams

Ontario RAT-3 serrated, 8633

brand

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Ontario RAT-3 serrated, 8633

Ontario RAT-3 serrated, 8633

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Ontario RAT-3 serrated, 8633

Ontario RAT-3 serrated, 8633

Ontario RAT-3 serrated, 8633

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Ontario RAT-3 serrated, 8633

Relevant topics