Work Sharp Precision Adjust sharpening system, WSBCHPAJ

For the price, this is absolutely fantastic. This was my first angled sharpening system. Typically I hand sharpen with whetstones, but since getting a few higher end pocket knives, I wanted to be more precise with the grind angle. For context, I have a Jack Wolf with S90V steel, and a GiantMouse with Elmax. I've read that S90V is very hard to sharpen without diamond stones. Setting up the WorkSharp was easy. One thing to note, if you have narrower blades, you might have to clamp them a bit further forwards. Adjusting the angle was simple too, I used the sharpie method to find the current grind angle. I sharpened my JW knife, including reprofiling the tip slightly. The 320 grit diamond stone made light work of it. After using the ceramic honing stone, and stropping the blade on some leather, it's now sharp enough to shave my arm hair. To think I that I thought 320/600/ceramic would not be enough... I was wrong! For the price, this is a very effective system and will get your knives more than sharp enough. A couple things to note, the clamp flexes a bit so don't press too hard with the stone. Gentle pressures is enough, and I've not noticed any issues to the edge bevel. Also, though I've not tried it yet, larger blades may prove a bit more difficult for the range of motion of the stone. The knife I tried it on is 3" long. Long story short: buy it. Also thanks to Knives&Tools team a fast dispatch!