The Work Sharp Angle Set knife sharpener is a complete, versatile and adjustable knife sharpener you can use to sharpen almost any type of tool. Want to sharpen a peeling knife at a 15 degree angle? No problem at all! Want to sharpen a machete with a 25 degree angle? No problem at all! Place the sharpener on a table, determine the right sharpening angle and you are good to go.
The sharpener comes in a practical storage box to make sure you can easily store or transport the sharpener. Open the storage box, click the triangular sharpening rods in the correct sharpening angle with the magnets and turn the sharpening rods until the sharpening surface you want to use is facing outwards. You can adjust the sharpening rods to a 15, 17.5, 20, 22.5, and 25 degree angle and they have three different grain sizes. A medium side with a diamond layer, one fine side with a diamond layer and an extra fine side with a ceramic layer. The sharpening rods can rotate 360 degrees so you can easily switch between the diamond or the ceramic sharpening surface. The knife sharpener also comes with a round ceramic sharpening rod (extra fine) which you can attach on the sharpening rods. With it you can sharpen serrated knives with a serration of up to 3 mm wide.
The two diamond-coated sides are perfect when sharpening completely blunt knives. Start with the medium diamond-coated side and continue with the fine diamond-coated side. The extra-fine ceramic side will finally leave you with a razor-sharp edge. This side is also great when keeping your knives in great shape. Repeatedly move the knife alongside the extra-fine ceramic side to make sure your knives stay nice and sharp. You also extend the life of the knife by doing so! You don't need water or oil to use this sharpener. As such you can quickly get started!