Name: Zero Tolerance 0640WBW Blackwashed Factory Special Edition pocket knife, Emerson design
Brand: Zero Tolerance
SKU: ZT0640WBW
Price: 318.2 GBP
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Zero Tolerance knife storage bag - ZT997

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

productlabel

Spyderco Sharpmaker, 204MF

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Knives and Tools Knife Cleaning Mat, rubber

Skerper Maintenance Oil Pen MA002, 10 ml

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Knivesandtools #OneKnifeStand, knife stand

This **Zero Tolerance 0640WBW Factory Special Edition** is a cool Factory Special edition. Only produced a limited amount of times. Enhanced with a 20CV steel blade and titanium scales with blackwashed finish. This special edition is also enhanced with black carbon fibre inlay.

The Zero Tolerance 0640 was designed by Ernest Emerson. This American knife maker is one of the pioneers in the pocket knife world. This Zero Tolerance 640 is a very interesting design. Very Emerson, but also different from his usual designs.

The 640 is enhanced with a handle that will truly fit in every hand. All because Emerson made sure the handle is slightly 'convex'. There are also no imperative finger grooves which means that there are different ways of holding the knife. In terms of construction, thick titanium liners were added, which are flanked by carbon fibre scales. This carbon fibre, however, is very special: it is enhanced with a green glow. Zero Tolerance is one of the first large knife companies that experiments which coloured carbon fibre.

You can open the knife with the thumb disc on the spine of the blade. This disc is enhanced with a rough structure for more grip. As such you can easily and quickly open it with your thumb. While you expect most Zero Tolerance knives to work with ball bearings, the 640 is enhanced with phosphor bronze washers. Nice and solid and easy to maintain! The blade is made from CPM 20CV. A robust type of steel that retains its sharpness well. When opened a solid linerlock will lock the blade. Because of the thickness of the liners you could almost call it a framelock. Of course the titanium lockbar is enhanced with a steel insert that prevents wear and tear in the (very) long run.

Zero Tolerance 0640WBW Blackwashed Factory Special Edition pocket knife, Emerson design

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

legal_agecheck_key

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

carry_friendly

With this information we say whether a knife can be legally carried according to the knife laws in the United Kingdom. Warning! There are always exceptions and weapon-free zones where carrying knives may still not be allowed. Here you can find more information about the knife law in the [United Kingdom](/en/ct/uk-knife-laws.htm). No rights can be derived from this information.

UK Carry Friendly

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Zero Tolerance 0640WBW Blackwashed Factory Special Edition pocket knife, Emerson design

Zero Tolerance 0640WBW Blackwashed Factory Special Edition pocket knife, Emerson design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Zero Tolerance 0640WBW Blackwashed Factory Special Edition pocket knife, Emerson design

Zero Tolerance 0640WBW Blackwashed Factory Special Edition pocket knife, Emerson design

Zero Tolerance 0640WBW Blackwashed Factory Special Edition pocket knife, Emerson design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Zero Tolerance 0640WBW Blackwashed Factory Special Edition pocket knife, Emerson design

Relevant topics