The Work Sharp Pivot Pro knife sharpener, WSHHDPVT is a versatile knife and tool and sharpener. From knives to axes, chisels and (pruning)shears. You can sharpen them all with the Work Sharp Pivot Pro!
The first sharpening option is a slot with two tungsten carbide sharpening stones to sharpen knives with a 25-degree sharpening angle. Pull your knife through the slot a couple of times and you don't only sharpen your knife, you also create a convex edge for additional sharpness. The yellow part of this opening moves with the shape of your blade. As such you are left with perfectly straight sharpening results over the entire edge. The red sliding button is a lock you can use to lock the yellow part. As such it will no longer move to make sure the sharpener removes less material.
The second sharpening option are two ceramic sharpening steels with a 25-degree angle. These sharpening steels leave you with razor-sharp results.
The third sharpening option is when sharpening (pruning)shears. Pull the shears through the slot with the tungsten carbide sharpening steels and they will be as good as new in no time.
The last sharpening option is a diamond-coated sheet at the bottom of the sharpener. With it you can sharpen almost any tool at an angle of your choosing. Think, for instance, of chisels, but you can also always sharpen your knife. It doesn't contain a sharpening guide, so you will sharpen freely. Fortunately the large surface gives you some room to sharpen almost any type of tool.