Edge Pro sharpening stone (0.5 inch, not mounted), grit 400

This sharpening stone is intended for us in the Edge Pro sharpening system. Because the sharpening stone is only half an inch wide (1.3cm) it is very suitable for sharpening a knife with a curved blade. The curve of the blade is much easier to follow on a narrow stone than on a wide one. This sharpening stone is not mounted on the aluminum base plate which you need to clamp it into the Edge Pro sharpening system. This base plate can be ordered separately as an accessorie.

The grit size can not be directly compared to the grit sizes of Japanese water stones. Use therefore the table given here.

Comparison table EdgePro versus Japanese water stones

Edge Pro	Japanese water stones
120	120
220	700
320	2000
600	5000
1000	8000
1200	15000
2000 (tape)	10000
3000 (tape)	18000
6000 (tape)	20000

Edge Pro sharpening stone (not mounted), grit 400 Sharpening stone, grain 400, for use in an Edge Pro sharpening system. This sharpening stone is intended for us in the Edge Pro sharpening system. This sharpening stone is not mounted on the aluminum base plate which you need to clamp it into the Edge Pro sharpening system. This base plate can be ordered separately as an accessorie.

The grit size can not be directly compared to the grit sizes of Japanese water stones. Use therefore the table given here.

Product properties

• Grit 400
• Dimensions: 153x25x3.3 mm
• Not mounted on an aluminum base plate

Comparison table EdgePro versus Japanese water stones

Edge Pro (FEPA)	Japanese water stones (JIS)
120	130
220	240
320	400
600	1200
1000	2700
1200	4000
2000 (tape)	8000
3000 (tape)	10,000
6000 (tape)	30,000